Small loaders require oil lubrication for daily operations, so how to control the oil contamination of small loaders, now let’s understand how to prevent oil contamination when installing small loaders.
The suction port of the small loader hydraulic pump should be equipped with a strainer, and the suction port should be at a certain distance from the bottom of the tank; a high-pressure fine filter should be installed at the oil outlet of the small loader, and the filtering effect should meet the working requirements of the system to prevent pollution. The hydraulic system is faulty due to blockage of the material; a filter screen should be installed on the hydraulic oil tank partition to remove impurities that are not filtered by the return oil filter.
A metal protection ring should be installed on the hydraulic cylinder of the loader to prevent dirt from being carried into the cylinder and prevent mud and water radiation from colliding with the hydraulic cylinder. The hydraulic components should be inspected and cleaned before installation. And impurities; regularly check the hydraulic oil, once the oil is found to deteriorate, foam, sediment, oil and water separation, etc. should immediately clean the system and change the oil. Before the new oil is added to the tank of the loader, it should be settled by static precipitation. After filtration, it can be added. If necessary, an intermediate tank can be set up to precipitate and filter the new oil to ensure the oil is clean.MetInfo enterprise content manager system.
